Parking Lot Striping Jacksonville FL can be a rewarding, lucrative, and attractive home improvement project for homeowners. Parking lot strips can provide a beautiful landscaping upgrade to any neighborhood or business. When completed properly, they will increase property value, curb appeal, and the safety and visibility of your driveway.
Before you begin parking lot striping, make sure you have all the necessary permits in place and that all required signs have been installed. Also make sure there are no underground nuclear waste storage tanks at the proposed location. It may also be best to consult with your local government so you can make sure you have the proper zoning or other requirements in place. Professional parking lot striping companies typically perform all of this for you. If you decide to go at it on your own, make sure you follow all of the steps outlined below before starting your work. This will help ensure the project is a success.
The first step in your Parking Lot Striping project is laying the pavement. Most professional parking lot striping companies will already have the proper equipment for this. However, if you choose to attempt the job yourself, make sure to invest in a heavy duty paver. You will need to prepare the area by making deep cuts in the asphalt to prepare it for the striping. Once this is done, you will want to smooth out all of the cut edges with a wooden blade to prevent cracks from developing.
Your next task is to prepare the curbside and side traffic flow. When Parking Lot Striping is being performed in a residential area, it’s important to clearly mark all of the parking lots. Sidewalks and crosswalks will be useful for directing vehicle traffic from one area to another. Make sure that the paths are clear and free of obstacles so that pedestrians and drivers can easily move between them. You should also prepare for additional pedestrian traffic by removing any existing footpaths or bike lanes.
You should also mark the boundaries on the sidewalks and crosswalks with signs. You can utilize standard black arrows and paint them on the pavement as well as on the curb. You should also add crosswalks at the ends of both strips. These added elements will help you clearly identify your parking lot striping project when the time comes to install it.
Your asphalt surface will need to be cleaned and patched if there are any holes or cracks. You should employ a professional parking lot maintenance company for this task to ensure the best results. If you don’t have the time or manpower to deal with this task, then you can hire a contractor who will make the necessary repairs.
When painting your asphalt surface, you should start by applying an appropriate base coat. This will help protect the asphalt and keep it from cracking or breaking apart during the actual application of the colored stripes. You should apply three to six layers of the paint depending on the actual length of your parking lot design. In order to create a smooth and even application, you should work in three to six inches wide gaps between each strip.
When the final coat of paint has dried, you should make sure that you smooth out any gaps or cracks before you lay the second batch of paint. You should only use two or three layers of paint for this project if you want to get a professional looking end result. When you are finished installing your parking lots, you should make sure that you mow them every few months. Mowing the lawn will make your spaces look more uniform and will also help make your driveway more attractive. Properly mowing lawns will also keep you from having to apply a third or fourth layer of paint to make sure that your driveway is uniform all the way around.